top of page

Steering Head Inserts ZXR / ZX7R(R)

ZX7R Steering Inserts
ZX7R Steering Insert Fitted

<Click on main image to open gallery>

Race Kit Swing Arm Pivots:


Steering head frame inserts for ZXR / ZX7R(R) frames. These replace the original large steel inserts and allow tapper roller bearings to be fitted.


The original steel inserts which also doubled as the inner bearing race are no longer available. This setup is a direct replacement. The bearing inner diameter is the same as original at 35mm. Over all the yokes will sit 1mm further apart, however there are sufficient stem threads to cope with this. (If there is an issue for any reason the locking ring can be reduced in thickness, it is thicker than it needs to be.)


Part Number:  DUN366_01 Insert ZXR/ZX7R Steering Bearing


Price: £40 pair

Taper roller bearings NTN (high quality) £25 each / £50 pair

bottom of page